HDMI ARC to SPDIF/Coaxial 192KHz 5.1 Channel Audio Extractor

HDMI ARC Adapter to digital and analog signals. Use the HDMI cable to connect the TV HDMI ARC port to the ARC audio converter, and then connect optical/coaxial or 3.5mm to the soundbar, speaker, home theater, A/V receiver, etc. Note: 3.5 Jack only supports only PCM/LPCM audio. TV must have an ARC port, otherwise, it cannot be used.

HDMI audio extractor Supports 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz sampling rates. Note: CEC is not supported, When you open ARC, the TV remote control can not control the volume, you can only adjust the speaker/speaker/home theater volume.

When switching to HDMI ARC mode, Plug it in and play after powering -on, not more operation, convenient and fast. Note: Optical and coaxial support 5.1CH and backward compatible 2.0CH, 3.5mm headphone port supports up to 2.0CH.

The Aluminum alloy ARC audio converter has good heat dissipation and durability. It uses high-end chips to reduce digital noise technology, signal gain technology, dual signal processing, and clear sound quality. Support multi-channel simultaneous audio output, and sound synchronization without delay.

Easy installation and operation, perfect match. Compatible with all TVs and audio devices with HDMI ARC ports. Supports Dobly@5.1, DTS@5.1, Dobly AC3, DSD, PCM, and LPCM.

NOTE: It will not work with Dolby Atmos/Dolby Digital Plus etc.

HDMI ARC Audio Extractor

This HDMI ARC Audio Extractor can output TV sound to digital optical/coaxial and analog 3.5mm headphone jack (can output sound at the same time) through the HDMI ARC interface, the perfect audio adapter.

Optical and Coaxial interface supports 5.1 channel transmission

5.1CH Mode: Set 5.1CH to get 5.1 digital surround. Which can be extracted via Optical SPDIF and Coaxial output. Supports Dolby, DTS, Dobly AC3, DSD, PCM, and LPCM.

Three Audio mode settings:

1. 5.1CH Mode: Set 5.1CH to get 5.1 digital surround. (HDMI input source must support 5.1CH), Optical fiber coaxial interface supports 5.1 channel transmission. (HDMI ARC 192KHz Channel Audio Extractor)
2. 2CH Mode: Set 2CH for analog stereo audio. Extracts the digital 2CH PCM stereo audio signal from the ARC HDMI
3. input while converting it to 2CH analog stereo output via its analog 3.5mm/optical SPDIF/coaxial output.
   PASS Mode: The output audio format depends on the ARC TV input signal.

Specifications:

• Support SPDIF output
• Support Coaxial output
• Support 3.5mm stereo headphone output
• Support switch noise reduction
• Support automatic signal mute function
• Support transmission of 192KHz audio sampling rate
• 3.5mm stereo headphone port equipped with

• high-performance audio amplifier

• Optical fiber coaxial interface supports 5.1 channel transmission

Package included

1 x Audio Adapter
1 x Type-c power cable
1 x Users Manual